Bio-Matrix TRC (Total Remediation Culture) - Biodegradable Hard Surface Cleaner and Biostimulant

TRC is a proprietary blend of bacterial spores, concentrated biodegradable surfactants and biostimulating agents. TRC is quick acting and effective in removing surface stains resulting from spilled petroleum products on concrete, asphalt, rock and soil. Used alone or in conjunction with other bioremediation products, TRC shortens clean-up times, increases contaminant bioavailability and initiates biodegradation.

Features

• Inoculates contaminations with bacteria
• Cleans surfaces of oil spills and stains
• Cleans oily equipment, vehicles and tools
• Contains no petroleum distillates or solvents
• Contains essential microbial nutrients
• Enhances biodegradation above and below ground surface when used as recommended
• No removal or replacement of contaminated materials is necessary.

Directions for Use

TRC can be diluted between 1:2 for heavier loads and stains, down to 1:4 for lighter applications.

• Hard Surface Cleaning - concrete, asphalt:  Dampen the contaminated surface, apply TRC and allow it to work for 20-30 minutes.  Keep the worksite damp during treatment and repeat as necessary.
• Porous Surface Cleaning (Soils) - Scrape surface, dampen and apply product. Scrape the surface again and rinse. To further accelerate biodegradation of the petroleum products, follow with HRC (Hydrocarbon remediation culture).
• Recommended Application Equipment - TRC cleans petroleum based materials from nearly all surfaces regardless of the application.
• General Equipment Cleaning - Do not pre-wet surfaces or use in direct sunlight on painted surfaces. A 3:1 dilution is recommended for most applications with a maximum recommended dilution of 5:1.
• Pressure Washing/Degreasing - Pressure blast heavy materials. Spray surface with a 50/50 solution and pressure wash again from bottom up. Do not allow surfaces to dry.
• Precautions and limitations - Wear protective clothing (rubber gloves, eye protection). Pre-test new finishes by applying to a small area first. Best results are seen when applied to damp concrete surfaces.

Product Characteristics

Available Packaging

Storage and Handling
 
Store in a cool, dry place. Avoid inhalation. Wash hands thoroughly with warm, soapy water after contact. Avoid eye contact.